66 Chevy C-10  - Shop Project Truck

Bryan's C10 has come a long way from a misguided ebay endeavor.  The questionably clacky 327 was swapped out in favor of a GM crate motor.  That gave us the time to clea up the engine bay and firewall, and correct years of improper repairs and neglect. The plan was to make this a solid daily driver, without going overboard on the restoration.    The firewall was welded up and smoothed out, chassis stripped and painted, and engine dressed up traditionally, which came out great.  We used simple pine strips for bed wood, with marine sealer and 3 coats of satin varnish.  The shoddy suspension was replaced with air ride, and of course, Accuair management.

IMAG8223.jpg
IMAG8223.jpg
press to zoom
Rust Repair
Rust Repair
press to zoom
Engine - Before Cleanup
Engine - Before Cleanup
press to zoom
Engine - Before Cleanup
Engine - Before Cleanup
press to zoom
Engine Out
Engine Out
press to zoom
Breakdown Before Cleanup
Breakdown Before Cleanup
press to zoom
Prepping for smooth Firewall
Prepping for smooth Firewall
press to zoom
Firewall patch panel
Firewall patch panel
press to zoom
Firewall patch panel
Firewall patch panel
press to zoom
Smooth Firewall Finished
Smooth Firewall Finished
press to zoom
350 Crate Motor
350 Crate Motor
press to zoom
350 Crate Motor
350 Crate Motor
press to zoom
350 Crate Motor
350 Crate Motor
press to zoom
350 Crate Motor Install C10
350 Crate Motor Install C10
press to zoom
C10 350 before and after
C10 350 before and after
press to zoom
Custom bed wood installed, raised.
Custom bed wood installed, raised.
press to zoom
Dakota Digital VHX Gauges
Dakota Digital VHX Gauges
press to zoom
Dakota Digital VHX Gauges
Dakota Digital VHX Gauges
press to zoom
Primered
Primered
press to zoom
66 C10
66 C10
press to zoom